Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY (for Floor Shift Type): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal
- Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
4. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY Removal
5. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY Removal
6. REMOVE CONSOLE BOX CARPET
7. REMOVE REAR CONSOLE BOX ASSEMBLY Removal
8. REMOVE FRONT CONSOLE BOX Removal
9. REMOVE CENTER AIRBAG SENSOR ASSEMBLY





(a) Disconnect the holder (with connectors).
(b) Remove the 3 bolts and airbag sensor.