Smart Key System (for Entry Function)

THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Entry Function): CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT
The following items can be customized.

NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Be sure to make a note of the current setting before customizing.
(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Customize.

(e) Select the setting by referring to the table below.









2. ENTRY UNLOCK MODE SWITCHING FUNCTION

(a) To use the entry unlock mode switching function, make sure the engine switch is off and simultaneously press and hold the lock switch on the key and another key switch for 5 seconds.

* When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: all door unlock mode, driver door unlock mode.

NOTICE:
After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.

* Driver door unlock mode (default):

* When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all the doors unlock.

* All door unlock mode:

* When a touch sensor is touched, all the doors unlock.

(b) The certification ECU receives the signal from the key and changes the smart key system to the appropriate entry unlock mode.

(c) The certification ECU sounds the wireless door lock buzzer and combination meter buzzer to inform the user that the mode has been switched.





HINT
The function only changes the entry unlock mode of the smart key system. It does not switch the unlocking of the wireless door lock control.

3. KEY CANCEL

The key cancel operation disables the following functions:

* Entry Unlock/Lock

* Key Lock-in Prevention

* Entry Back Door Open

* Warning

* Entry Ignition

(a) The operation procedures are as follows:

Precondition:

Engine switch off, driver side door closed and unlocked.

(1) Unlock the driver side door once with the unlock switch of the key.

(2) Open the driver door within 5 seconds.

(3) Unlock the driver side door twice with the unlock switch of the key within 5 seconds.

(4) Close and open the driver door twice within 30 seconds.

(Driver door: Open condition -> Close -> Open -> Close -> Open)

(5) Unlock the driver side door twice with the unlock switch of the key within 5 seconds.

(6) Close and open the driver door once within 30 seconds.

(Driver door: Open condition -> Close -> Open)

(7) Close the driver door within 5 seconds.

When key cancel is activated, the wireless door lock buzzer sounds twice.

To return to the original condition, perform the procedure again. When the original condition is restored, the wireless door lock buzzer sounds once.