Reassembly

INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

1. INSTALL SECURITY INDICATOR LIGHT ASSEMBLY Installation

2. INSTALL TELLTALE LIGHT ASSEMBLY Installation

3. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) Installation

4. INSTALL AUTOMATIC LIGHT CONTROL SENSOR Installation

5. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY Installation

6. INSTALL NO. 2 INSTRUMENT PANEL WIRE

(a) Attach the 15 clamps to install the No. 2 instrument panel wire.

(b) Connect the connector.

7. INSTALL ACCESSORY METER ASSEMBLY Installation

8. INSTALL DEFROSTER NOZZLE ASSEMBLY

(a) Install the defroster nozzle with the 3 screws.

9. INSTALL NO. 3 HEATER TO REGISTER DUCT

(a) Attach the claw to install the No. 3 heater to register duct.

(b) Install the 2 screws.

10. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

(a) Attach the 2 claws to install the No. 2 side defroster nozzle duct.

(b) Install the screw.

11. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

(a) Attach the 2 claws to install the No. 1 side defroster nozzle duct.

(b) Install the screw.

12. INSTALL NO. 2 HEATER TO REGISTER DUCT

(a) Install the No. 2 heater to register duct with the 4 screws.

13. INSTALL NO. 1 HEATER TO REGISTER DUCT

(a) Install the No. 1 heater to register duct with the 4 screws.