Removal

SEAT: REAR NO. 2 SEAT ASSEMBLY: REMOVAL

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.
1. REMOVE DECK BOARD ASSEMBLY

(a) Pull the 2 rear seat lock release straps and fold down the 2 headrests.

(b) Operate the 2 rear seat lock release levers and fold down the 2 seatbacks.

(c) Using a screwdriver, detach the 2 claws and open the cover.









HINT
* Tape the screwdriver tip before use.
* Use the same procedure to open the cover on the other side.
(d) Remove the 2 bolts.





(e) Detach the 4 clips and remove the deck board.

2. REMOVE REAR FLOOR MAT SUPPORT PLATE

(a) Remove the 3 bolts.









(b) Detach the 4 claws and 2 guides.

(c) Detach the 5 clips and remove the support plate.

3. REMOVE REAR NO. 4 FLOOR BOARD

(a) Using a moulding remover, detach the clip and 4 claws.









(b) Detach the 2 guides and remove the floor board.

4. REMOVE REAR NO. 3 FLOOR BOARD

(a) Using a moulding remover, detach the clip and 4 claws.









(b) Detach the 2 guides and remove the floor board.

5. REMOVE DECK BOARD BRACKET REINFORCEMENT

(a) Remove the 2 bolts.









(b) Detach the 2 hooks and remove the reinforcement.

6. REMOVE NO. 1 DECK BOARD BRACKET LH

(a) Remove the 2 bolts and bracket.





7. REMOVE REAR NO. 2 SEAT ASSEMBLY LH

(a) Operate the seat cushion lock release lever and raise the seatback.

(b) Pull out the seat cushion.

(c) Remove the 2 bolts.





(d) Using a screwdriver, detach the 2 guides and 6 claws and open the 2 covers.









HINT
Tape the screwdriver tip before use.

(e) Remove the 2 bolts.





(f) Remove the rear No. 2 seat assembly from the vehicle.

NOTICE:
Be careful not to damage the vehicle body.

HINT
If removing the seat on the RH side with the LH side installed, remove it with the No. 3 rear seat leg cover LH raised as shown in the illustration.