Installation

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.
1. INSTALL REAR COMBINATION LIGHT LENS AND BODY LH

(a) Attach the 3 clips and 2 claws to install the rear combination light lens and body.

(b) Install the 2 nuts.

Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)

(c) Connect the connector.

(d) Install the cover.