Crankshaft Position Sensor: Testing and Inspection

2TR-FE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSPECTION

1. INSPECT CRANKSHAFT POSITION SENSOR

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:









NOTICE:
In the chart above, the terms "Cold" and "Hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

(b) If the result is not as specified, replace the crankshaft position sensor.