Removal

EXTERIOR: FRONT BUMPER: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE RADIATOR GRILLE Removal

3. REMOVE FRONT BUMPER ASSEMBLY (w/o Fog Light)

(a) Put protective tape around the front bumper assembly.





HINT
Use the same procedure for the RH side and LH side.

(b) Remove the screw.





HINT
Use the same procedure for the RH side and LH side.

(c) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

HINT
Use the same procedure for the RH side and LH side.

(d) Remove the 7 screws and clip.





(e) Disengage the 4 claws and disconnect the front bumper assembly.





HINT
Use the same procedure for the RH side and LH side.

(f) Remove the front bumper assembly.

4. REMOVE FRONT BUMPER ASSEMBLY (w/ Fog Light)

(a) Put protective tape around the front bumper assembly.





HINT
Use the same procedure for the RH side and LH side.

(b) Remove the screw.





HINT
Use the same procedure for the RH side and LH side.

(c) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

HINT
Use the same procedure for the RH side and LH side.

(d) Remove the 7 screws and clip.





(e) Disengage the 4 claws and disconnect the front bumper assembly.





HINT
Use the same procedure for the RH side and LH side.

(f) Disconnect each fog light connector, and then remove the front bumper assembly.