Power Back Door System

ENGINE HOOD / DOOR: POWER BACK DOOR SYSTEM: SYSTEM DIAGRAM










ENGINE HOOD / DOOR: POWER BACK DOOR SYSTEM: SYSTEM DESCRIPTION

1. POWER BACK DOOR SYSTEM DESCRIPTION

(a) The power back door system controls the power back door by automatically opening and closing the power back door with the motor.

(1) The power back door system operates only when the necessary conditions are satisfied.

(2) The power back door ECU records the back door positions in the power back door ECU memory.

If the battery, power back door fuse, power back door ECU or power back door drive unit are removed and then reinstalled, the power back door ECU loses the memory of the door positions.

In such cases, initialization of the power back door system is necessary. Please refer to the initialization procedure specified in step [*1].

(3) "OPEN/CLOSE" request signals for the back door are input to the power back door ECU.

Then, the power back door ECU controls the back door opening/closing operation by outputting commands to the back door lock and back door drive unit.

(4) The power back door system has various request signals: "OPEN/CLOSE" request signal from the transmitter switch*, "OPEN/CLOSE" request signal from the power back door opener/closer switch, "CLOSE" request signal from the power back door closer switch, and "OFF" request signal from the back door main switch.

HINT
*: w/ Smart Key system

(5) The power back door system sets off an alarm (using a buzzer) and hazard warning lights when the power back door starts operating.

(6) The power back door system causes a warning buzzer to sound when the shift lever is moved to any position except P when the power back door starts operating or while the power back door is operating (the buzzer continues sounding).

(7) [*1] The power back door system turns OFF when the shift lever is moved to any position except P while the power back door is opening.

The power back door continues to close when the shift lever is moved to any position except P while the power back door is closing.

(8) The power back door reverses the direction that the power back door is operating if any switch is pressed during operation.

(9) A pulse sensor and a touch sensor are used to prevent anything from being caught in the door while the power back door is closing (jam protection function).

(10) The power back door system stops motor operation and switches to the manual operation mode when the jam protection function is activated repeatedly more than the specified number of times.

(11) The power back door system slows the back door down when the back door approaches the fully opened position or fully closed position in order to reduce the impact against the vehicle body.

(b) Function of main components:





HINT
*: w/ Smart Key system