Reassembly

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY

1. INSTALL REAR BUMPER SIDE SUPPORT

(a) Engage the 2 claws and install the rear bumper side support.





2. INSTALL TAIL AND STOP LIGHT BULB

(a) Install the tail and stop light bulb to the tail and stop light socket.

(b) Turn the tail and stop light bulb and the tail and stop light socket in the direction indicated by the arrow and install them as a unit.





3. INSTALL REAR TURN SIGNAL LIGHT BULB

(a) Install the rear turn signal light bulb to the rear turn signal light socket.

(b) Turn the rear turn signal light bulb and the rear turn signal light socket in the direction indicated by the arrow and install them as a unit.





4. INSTALL BACK UP LIGHT BULB

(a) Install the back up light bulb to the back up light socket.

(b) Turn the back up light bulb and the back up light socket in the direction indicated by the arrow and install them as a unit.





5. INSTALL REAR COMBINATION LIGHT BODY GASKET

(a) Install a new rear combination light body gasket.