Door Lock Position Circuit

LIGHTING: LIGHTING SYSTEM: Door LOCK Position Circuit
- Door LOCK Position Circuit

DESCRIPTION

The main body ECU receives each door lock position switch signal to control the illuminated entry system.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. READ VALUE USING TECHSTREAM

(a) Connect Techstream to the DLC3.

(b) Turn the ignition switch on (IG).

(c) Turn Techstream on.

(d) Select the following menu items: Body Electrical / Main Body / Active Test.

Main Body:





HINT
* *1: w/ Smart Key System, w/ Power Back Door, w/ Glass Hatch Opener
* *2: w/o Smart Key System, w/o Power Back Door, w/o Glass Hatch Opener

OK:

Normal conditions listed above are displayed.

HINT
If the normal condition listed above are not displayed, perform the trouble shooting of the power door lock control system.

NG -- GO TO POWER DOOR LOCK CONTROL SYSTEM

OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures