Front Axle Hub

AXLE: FRONT AXLE HUB: ON-VEHICLE INSPECTION

1. REMOVE FRONT WHEEL

2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY Removal

3. REMOVE FRONT DISC Disassembly

4. INSPECT FRONT AXLE HUB BEARING LOOSENESS

(a) Using a dial indicator, check for looseness near the center of the front axle hub.





Maximum looseness:

0 mm (0 in.)

NOTICE:
Ensure that the dial indicator is set perpendicular to the measurement surface.

HINT
If the looseness exceeds the maximum, replace the front axle hub bearing.

5. INSPECT FRONT AXLE HUB RUNOUT

(a) Using a dial indicator, check for runout on the surface of the axle hub outside the hub bolt.





Maximum runout:

0.05 mm (0.0020 in.)

NOTICE:
Ensure that the dial indicator is set perpendicular to the measurement surface.

HINT
If the runout exceeds the maximum, replace the front axle hub.

6. INSTALL FRONT DISC Reassembly

7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY Installation

8. INSTALL FRONT WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)