How To Proceed With Troubleshooting

SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
*: Use Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS

(a) Confirm problem symptoms Problem Symptoms Table.

NEXT -- Continue to next step.

3. CHECK CAN COMMUNICATION SYSTEM*

(a) Use Techstream to check if the CAN communication system is functioning normally.

HINT
Refer to "Bus Check" for the CAN communication system

The center airbag sensor assembly is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there is no trouble in the CAN communication system.

Result:





B -- INSPECT CAN COMMUNICATION CIRCUIT
A -- Continue to next step.

4. SRS WARNING LIGHT CHECK

(a) Proceed to Diagnosis System Diagnosis System.

NEXT -- Continue to next step.

5. CHECK FOR DTC*

(a) Proceed to DTC Check / Clear DTC Check / Clear.

Result:





B -- GO TO STEP 7
A -- Continue to next step.

6. DIAGNOSTIC TROUBLE CODE CHART

(a) Proceed to Diagnostic Trouble Code Chart Airbag System.

NEXT -- GO TO STEP 9

7. SYMPTOM SIMULATION

(a) Proceed to Diagnosis System Diagnosis System.

NEXT -- Continue to next step.

8. PROBLEM SYMPTOMS TABLE

(a) Proceed to Problem Symptoms Table Problem Symptoms Table.

NEXT -- Continue to next step.

9. CIRCUIT INSPECTION*

NEXT -- Continue to next step.

10. IDENTIFICATION OF PROBLEM

NEXT -- Continue to next step.

11. REPAIR OR REPLACEMENT

NEXT -- Continue to next step.

12. CONFIRMATION TEST

NEXT -- END