Installation

2GR-FE STARTING: ENGINE SWITCH: INSTALLATION

1. INSTALL ENGINE SWITCH

(a) Engage the 2 claws to install the switch.





(b) Connect the switch connector.

2. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation

3. INSTALL CONSOLE BOX ASSEMBLY (w/o Rear Air Conditioning System) Installation

4. INSTALL CONSOLE BOX ASSEMBLY (w/ Rear Air Conditioning System) Installation

5. INSTALL LOWER REAR CONSOLE BOX Installation

6. INSTALL NO. 2 CONSOLE BOX DUCT (w/o Rear Air Conditioning System) Installation

7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System) Installation

9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System) Installation

10. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

11. INSTALL FRONT DOOR SCUFF PLATE LH Installation

12. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System) Installation

13. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System) Installation

14. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System) Installation

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization