Rear View Monitor System

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: TERMINALS OF ECU

1. TELEVISION CAMERA ASSEMBLY

(a) Disconnect the T10 camera connector.





(b) Measure the voltage and resistance of each terminal of the wire harness side connector.





(c) If the result is not as specified, there may be a malfunction on the wire harness side.

(d) Reconnect the T10 camera connector.

(e) Measure the voltage and frequency of each terminal of the connector.





(f) If the result is not as specified, the camera may have a malfunction.

(g) Reference:





(h) Oscilloscope waveform

(1) Waveform 1





2. NAVIGATION RECEIVER ASSEMBLY Pinout Values and Diagnostic Parameters