Radio Receiver Power Source Circuit

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: Radio Receiver Power Source Circuit
- Radio Receiver Power Source Circuit

DESCRIPTION

This circuit provides power to the radio receiver.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. INSPECT RADIO RECEIVER ASSEMBLY

(a) Disconnect the radio receiver connectors.





(b) Measure the resistance according to the value in the table below.

Standard resistance:





(c) Measure the voltage according to the values in the table below.

Standard voltage:





*1: 10 Speaker System

*2: 6 Speaker with Rear Seat Entertainment System

*3: 6 Speaker without Rear Seat Entertainment System

*4: for "Bluetooth" handsfree Function

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE