Scan Tool Testing and Procedures

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: DATA LIST / ACTIVE TEST

1. DATA LIST

(a) The wireless door lock control data list can be displayed while the Techstream is connected to the DLC3 with the ignition switch in the ON position. Follow the prompts on the tester screen to access the DATA LIST.





2. ACTIVE TEST

HINT
Performing the ACTIVE TEST using the Techstream allows components such as the relay, VSV and actuator to operate without removing parts. Performing the ACTIVE TEST as the first step in troubleshooting is one way to shorten labor time.

It is possible to display the DATA LIST during the ACTIVE TEST.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to the ON position.

(c) According to the display on the tester, preform the ACTIVE TEST.

HINT
The ignition switch must be turned to the ON position to proceed with the ACTIVE TEST using the Techstream.