Canada - Body - Sliding Door(s) Don't Operate Smoothly

Bulletin
TSB3506

Issue Date
November 17, 2010

Market
Canada

Title
SLIDING DOOR OPERATING EFFORT

Component
BODY COMPONENTS

Models
'04-'10 Sienna

INTRODUCTION:
Some 2004 - 2010 Sienna vehicles may exhibit a condition where one or both sliding doors do not open or close smoothly. Please follow the instructions in this bulletin to inspect the sliding door lock assemblies and replace the affected components as needed.






APPLICABILITY:






WARRANTY INFORMATION:






PARTS INFORMATION:






REQUIRED TOOLS & EQUIPMENT:

REPAIR PROCEDURE:
1. Inspect the front and rear slide door lock assemblies for proper operation.
2. If any of the slide door lock assemblies do NOT operate smoothly, or show corrosion on the latch mechanism, replace as necessary per Repair Manual instructions.

Refer to the Repair Manual within E-TAS / TIS library:
Manual Sliding Door
- Division: Toyota
- Model: Sienna
- Year: 2004 / 2005
- Service Category: Vehicle Exterior
- Section: Door/Hatch
- Keyword: Slide Door: Overhaul / Adjustment

- Division: Toyota
- Model: Sienna
- Year: 2006 / 2007
- Service Category: Vehicle Exterior
- Section: Door/Hatch
- Keyword: Engine Hood/Door: Slide Door: Disassembly / Adjustment / Reassembly

- Division: Toyota
- Model: Sienna
- Year: 2008 / 2009 / 2010
- Service Category: Vehicle Exterior
- Section: Door/Hatch
- Keyword: Engine Hood/Door: Slide Door (w/o Power Slide Door): Disassembly / Adjustment / Reassembly

Power Sliding Door
- Division: Toyota
- Model: Sienna
- Year: 2004 / 2005
- Service Category: Vehicle Exterior
- Section: Door/Hatch
- Keyword: Power Slide Door: Overhaul / Adjustment

- Division: Toyota
- Model: Sienna
- Year: 2006 / 2007
- Service Category: Vehicle Exterior
- Section: Door/Hatch
- Keyword: Engine Hood/Door: Power Slide Door: Disassembly / Adjustment / Reassembly

- Division: Toyota
- Model: Sienna
- Year: 2008 / 2009 / 2010
- Service Category: Vehicle Exterior
- Section: Door/Hatch
- Keyword: Engine Hood/Door: Slide Door (w/ Power Slide Door): Disassembly / Adjustment / Reassembly

3. Confirm proper operation of the sliding door.

NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.