Data List / Active Test

BRAKE CONTROL: ANTI-LOCK BRAKE SYSTEM: DATA LIST / ACTIVE TEST

1. DATA LIST

(a) While Techstream is connected to the DLC3 with the ignition switch in the ON position, the ABS data list can be displayed. Follow the prompts on the tester screen to access the Data List.









2. ACTIVE TEST

HINT
Performing the Active Test using Techstream allows the relay, actuator, etc. to operate without removing any parts. Performing the Active Test as the first step of troubleshooting is one of the methods to shorten labor time.

It is possible to display the Data List during the Active Test.

(a) Connect Techstream to the DLC3.

(b) Turn the ignition switch to the ON position.

(c) According to the display on the tester, perform the Active Test.

HINT
The ignition switch must be turned to the ON position to proceed to the Active Test using Techstream.