Reassembly

2GR-FE LUBRICATION: OIL PUMP: REASSEMBLY

1. INSTALL OIL PUMP COVER

(a) Coat the drive and driven rotors with engine oil and place them into the timing chain cover with the marks facing outward (oil pump cover side). Check that the rotors rotate smoothly.





(b) Install the oil pump cover with the 8 bolts.





Torque : 9.1 Nm (93 kgf-cm, 81 in-lbf)





2. INSTALL OIL PUMP RELIEF VALVE

(a) Coat the oil pump relief valve with engine oil.





(b) Insert the relief valve and relief valve spring into the oil pump cover hole.

(c) Using a 27 mm socket wrench, install the plug.

Torque : 49 Nm (500 kgf-cm, 37 ft-lbf)