Noise Occurs from Generator while Engine is Running

2GR-FE CHARGING: CHARGING SYSTEM: Noise Occurs from Generator while Engine is Running
- Noise Occurs from Generator while Engine is Running

INSPECTION PROCEDURE

PROCEDURE

1. CHECK LOOSENESS OF V-RIBBED BELT

(a) Check the tension of the belt by pushing it down with a finger.

OK:

The tension of the belt is enough.

NG -- REPLACE V-RIBBED BELT TENSIONER ASSEMBLY
OK -- Continue to next step.

2. CHECK V-RIBBED BELT FOR WEAR

(a) Check the V-ribbed belt for wear.

OK:

The V-ribbed belt is not worn.

NG -- REPLACE V-RIBBED BELT
OK -- Continue to next step.

3. CHECK CLUTCH PULLEY FOR WEAR

(a) Check the clutch pulley groove for wear or other defects.

OK:

The clutch pulley groove is not damaged.

NG -- REPLACE CLUTCH PULLEY
OK -- Continue to next step.

4. CHECK FOR NOISE WHILE CLUTCH PULLEY IS OPERATING

(a) Perform a road test and check if noise occurs when decelerating.

OK:

Noise does not occur.

NG -- REPLACE CLUTCH PULLEY

OK -- REPLACE GENERATOR ASSEMBLY