How To Proceed With Troubleshooting

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function): HOW TO PROCEED WITH TROUBLESHOOTING

HINT
Troubleshoot in accordance with the procedures below.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK

NEXT -- Continue to next step.

3. PROBLEM SYMPTOMS TABLE

(a) When problem is not listed on problem symptoms table, proceed to A.

(b) When problem is listed on problem symptoms table, proceed to B.

B -- GO TO STEP 5
A -- Continue to next step.

4. PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM

(a) Data list / Active test.

HINT
Scan Tool Testing and Procedures

(b) Circuit inspection.

NEXT -- Continue to next step.

5. ADJUST, REPAIR OR REPLACE

NEXT -- Continue to next step.

6. RESET POWER WINDOW REGULATOR MOTOR

(a) If the AUTO switch (driver side switch) light of the power window master switch is blinking after the repair, reset the power window motor Programming and Relearning.

NEXT -- END