Front Planetary Gear

COMPONENTS





DISASSEMBLY OF FRONT PLANETARY GEAR



1. REMOVE BEARING AND RACES FROM FRONT PLANETARY RING GEAR
a. Remove the race from the front planetary ring gear front side.




b. Turn over planetary ring gear, remove the bearing and race.




2. REMOVE RACE FROM FRONT PLANETARY GEAR
3. TURN OVER PLANETARY GEAR AND REMOVE BEARING AND RACE

INSPECTION OF FRONT PLANETARY GEAR
CHECK FRONT PLANETARY RING GEAR BUSHING




Using a dial indicator, measure the inside diameter of the planetary ring gear bushing.

Maximum inside diameter: 24.08 mm (0.9480 in.)

If the inside diameter is greater than the maximum, replace the planetary ring gear.


ASSEMBLY OF FRONT PLANETARY GEAR
1. INSTALL RACES AND BEARING FRONT PLANETARY GEAR




a. Coat the races and bearing with petroleum jelly.
b. Install the race and bearing to the rear side of the planetary gear.




c. Turn over the planetary gear and install the race. Make sure that the shape of the lugs match the holes on the planetary gear.




NOTE: Bearing and races diameter

2. INSTALL RACES AND BEARING TO FRONT PLANETARY RING GEAR




a. Coat the races and bearing with petroleum jelly.
b. Install the race and bearing onto the rear side of the planetary ring gear.




c. Turn over the planetary ring gear and install the race onto the front side of the planetary ring gear.




NOTE: Races and bearing diameter