Owner Instruction

Failure to follow the recommendation indicated below could result in less effectiveness of the seat belt restraint system in case of vehicle collision, causing personal injury.

1. The seat belt extender must not be used:

(I) By anyone other than for whom it was provided (name recorded on seatbelt extender).
(II) In any vehicle or seat position other than the one for which it is provided.

2. To connect the extender to the seat belt, insert the tab into the seat belt buckle so that the buckle-release buttons of the extender and the seat belt are located on the same side as shown. You will hear a click when the tab locks into the buckle. Make sure that the connection is secure and the seat belt extender is not twisted.

3. When the seat belt extender is provided for rear seat position (with automatic locking retractor), make sure the retractor is locked when in use.





4. When releasing the seat belt, press on the buckle-release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and extender itself.

5. When not in use, remove the extender and store in the vehicle for future use.