Rear Seat - Extender Application Table

NOTES:


* For September and October, 1988 NUMMI Corolla production, the extender "R-1" must be used, not "A".


*1 If the rear 3-point seat belt is equipped, the extender "N" must be used, not "N-2".


*2 For Land Cruiser (FJ80) production after January, 1990, extender "K-2" must be used.





*3 For TMC production Corolla Sedan (on and after April, 1990 production, '91, & '92 models), if dimension "L2" & "L1" is under 13 inches (see figure 3), the extender must not be used.


Note: The extender must not be used for the center rear seat belt on any model.