Rear Drum Brake ServiceSteps

RECOMMENDED TOOLS
Tools and Equipment

PROCEDURES
1. Check for applicable Technical Service Bulletins (TSB).
2. Perform Initial Test Drive and Diagnosis By Symptom.
Testing and Inspection
3. Begin repairs, lift and support rear of vehicle, remove rear wheels and release the parking-brake.
4. Remove and Inspect drums, resurface or replace if necessary.
- Drum Removal Notes.
Drum Removal and Installation Notes
- Drum Inspection.
Testing and Inspection
5. Clean and Inspect rear brake assembly.
Testing and Inspection
6. Remove brake-shoes.
Service and Repair
7. Rebuild or replace wheel-cylinder if necessary.
Service and Repair
8. Install brake-shoes.
Service and Repair
9. Install drum and Bleed brakes.
10. Adjust Brakes.
Adjustments
11. Install tire and wheel assembly.
Installing Tire and Wheel Assembly
12. Perform After Repairs Test Drive.
Testing and Inspection

ENVIRONMENTAL AND SAFETY CONCERNS
Technician Safety Information