Valve Body Disassembly

Valve Body
(Disassembly of Valve Body)

1. REMOVE DETENT SPRING

2. REMOVE MANUAL VALVE

3. REMOVE LOWER VALVE BODY COVER
(a) Remove the eight Dolts and lower valve body cover.

(b) Remove the two gaskets and plate.

(d) Remove the retainer and three pins.

4. REMOVE LOWER VALVE BODY PLATE

5. REMOVE BOLTS FROM LOWER VALVE BODY
Remove the three bolts.

6. REMOVE BOLTS FROM FRONT AND REAR UPPER VALVE BODIES
(a) Turn over the valve body.
(b) Remove the five bolts from the front upper valve body, and remove the five bolts from the rear upper valve body.

7. LIFT OFF FRONT AND REAR UPPER VALVE BODIES AND PLATE AS A SINGLE UNIT
(a) Hold the valve body plate to the upper valve bodies and lift off the upper valve bodies.

HINT: Be careful that the check balls and retainers do not fall out.

(b) Remove the two gaskets and plate.

(Front Upper Valve Body)

SPECIFICATIONS OF VALVE BODY SPRINGS

HINT: . During reassembly, please refer to the spring specifications above to help differentiate the different springs.

SECTIONAL VIEW OF VALVE BODY

LOCATION OF RETAINER, STOPPER AND CHECK BALL

1. RETAINER AND STOPPER

2. CHECK BALL

(Rear Upper Valve Body)

SPECIFICATIONS OF VALVE BODY SPRINGS

HINT: During reassembly, please refer to the spring specifications above to help differentiate the different springs.

SECTIONAL VIEW OF VALVE BODY

LOCATION OF RETAINERS AND CHECK BALLS

1. RETAINER

2. CHECK BALL

(Lower Valve Body)

SPECIFICATIONS OF VALVE BODY SPRINGS

HINT:During reassembly, please refer to the spring specifications above to help differentiate the different springs.

SECTIONAL VIEW OF VALVE BODY

LOCATION OF RETAINERS, CHECK BALLS AND SPRINGS

1. RETAINER

2. CHECK BALL AND SPRING