Electrical Specifications

TIMING:

Base Ignition Timing 10° BTDC At Idle [1]
Advance Ignition Timing 13-27° BTDC At Idle [1]

[1] Refer to adjustment procedure.

RESISTANCE:

EGR Gas Temperature Sensor [2]
At 50°C (122°F) 69.4-88.5K Ohms
At 100°C (212°F) 11.9-14.4K Ohms
At 150°C (302°F) 2.8-3.6K Ohms

[2] California Only.

Ignition Coil:
Primary (cold) 0.41-0.50 Ohms
Secondary (cold) 10.2-13.8K Ohms


Pickup Coil:
Between terminals G1 and G- 140-180 Ohms
Between terminals G2 and G- 140-180 Ohms
Between terminals NE and G- 180-220 Ohms


Idle Speed Control (ISC) Valve:
Between terminals B1 and S1 or S3 10-30 Ohms
Between terminals B2 and S2 or S4 10-30 Ohms

Oxygen Sensor Heater:
At 20°C (68°F) 5.1-6.3 Ohms

Fuel Pressure VSV
At constant temperature 33-39 ohms

Coolant Temperature Sensor:
At -20°C (-4°F) 10-20K Ohms
At 0°C (32°F) 4-7K Ohms
At 20°C (68°F) 2-3K Ohms
At 40°C (104°F) 0.9-1.3K Ohms
At 60°C (140°F) 0.4-0.7K Ohms
At 80°C (176°F) 0.2-0.4K Ohms

Throttle Position Sensor:

CLEARANCE BETWEEN BETWEEN TERMINALS RESISTANCE
STOP SCREW AND LEVER

0mm (0in) VTA-E2 0.3-6.3K Ohms
0.50mm (.020in) IDL-E2 2.3K Ohms or less
0.70mm (.028in) IDL-E2 Infinity
Full Open VTA-E2 3.5-10.3K Ohms
-- VC-E2 4.25-8.25K Ohms

Air Flow Meter:

BETWEEN TERMINALS RESISTANCE

VS-E2 200-600 Ohms
(Measuring plate fully closed)

20-1200 Ohms
(Measuring plate fully open)

VC-E2 200-400 Ohms

FC-E1 Infinity
(Measuring plate fully closed)

Zero
(Other positions)

THA-E2

At -20°C (-4°F) 10-20K Ohms
At 0°C (32°F) 4-7K Ohms
At 20°C (68°F) 2-3K Ohms
At 40°C (104°F) 0.9-1.3K Ohms
At 60°C (140°F) 0.4-0.7K Ohms