Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Testing and Inspection

INSPECTION

1. Remove knock sensor.

- Disconnect the knock sensor connector.
- Using SST, remove the knock sensor (SST 09816-30010).
2. Using an ohmmeter, check that there is no continuity between the terminal and body.

- If there is continuity, replace the sensor.
3. Reinstall knock sensor.

- Using SST, install the knock sensor. SST 09816-30010

Torque: 44 Nm (33 ft lb)

- Connect the knock sensor connector.