Camshaft

Place the No.2 and No.5 bearing caps in their proper location.

Temporarily tighten these bearing cap bolts uniformly and alternately in several passes until the bearing caps are snug with the cylinder head.

Place the No.3, No.4, No.6 and No.7 bearing caps in their proper location.

Temporarily tighten these bearing cap bolts, alternately tightening the left and right bolts uniformly.

Place the No.1 bearing cap in its proper location. When doing this, check that there is no gap between the cylinder head and the contact surface of bearing cap.

Temporarily tighten the bearing cap bolts, alternately tightening the left and right bolts uniformly. Uniformly tighten the 14 bearing cap bolts in several passes.

Torque: 16 N.m (160 kgfcm, 12 ft.lbs.)

Install the No.4 and No.6 bearing caps in their proper location.

Temporarily tighten the bearing cap bolts uniformly and alternately in several passes until the bearing caps are snug with the cylinder head.

Place the No.2, No.3, No.5 and No.7 bearing caps in their proper location

Temporarily tighten these bearing cap bolts, alternately tightening the left and right bolts uniformly.