Without Scan Tool

1. OUTPUT DIAGNOSTIC TROUBLE CODE










(a) Turn the ignition switch to ACC or ON position and wait approx. 20 seconds.

(b) Using SST, connect terminals Tc and E1 of the DLC1 or DLC2.

SST 09843 - 18020

NOTICE:
Never make a mistake with the terminal connection position as this will cause a malfunction.

2. READ DIAGNOSTIC TROUBLE CODE










Read the 2-digit diagnostic trouble code as indicated by the number of times the SRS warning light blinks. As an example, the blinking patterns, normal, 11 and 31 are as shown in the illustration.

Normal code indication

- The light will blink 2 times per second.

Malfunction code indication

- In the event of a malfunction, the light will blink. The number represented by the first blink code output indicates the first digit of a 2-digit diagnostic trouble code.

- After a 1.5 second pause, the second blink code will indicate the second digit.

- If there are 2 or more codes, there will be a 2.5 second pause between each.

- After all the codes have been output, there will be a 4.0 second pause and they will all be repeated.

HINT:

- In the event of a number of trouble codes, indication will 1st from the smallest numbered code to the larger.

- If it does not output a diagnostic trouble code or outputs a diagnostic trouble code without terminal connection,proceed to the Tc terminal circuit inspection