Leakage Inspection
INSPECTION1. Remove the cold start injector.
2. Install a gasket, SST (2 unions), another gasket and 2 union bolts to the delivery pipe and injector.
3. Connect the SST (hose) to each union. (SST 09268-41045 (092368-41080))
4. Put a container under the injector.
5. Turn the ignition switch ON.
NOTE: Do not start the engine.
6. Using jumper, connect terminals FP and + B of the DLC1. (SST 09843-18020)
7. Check fuel leakage from the injector.
Fuel drop: One drop or less per minute.
8. After checking, turn the ignition OFF, remove jumper and reinstall the cold start injector, hoses and wiring to their original conditions.