Measurement Specifications

Output shaft bearing thrust clearance
Less than 0.10 mm / 0.0039 in.

Output shaft runout
Limit 0.03 mm / 0.0012 in.

Output shaft outer diameter
Limit
Part A 44.984 mm / 1.7710 in.
Part B 34.984 mm / 1.3773 in.

Low gear to output shaft oil clearance
STD 0.010 - 0.055 mm / 0.0004 - 0.0022 in.
Limit 0.075 mm / 0.0030 in.

Low gear thrust clearance
STD 0.10 - 0.25 mm / 0.0039 - 0.0098 in.
Limit 0.30 mm / 0.0118 in.

Transfer drive gear to output shaft oil clearance
STD 0.009 - 0.051 mm / 0.0004 - 0.0020 in.
Limit 0.071 mm / 0.0028 in.