ABS (TMC/Denso Made)

A 4-A, A 5-B ABS ACTUATOR
A-1, A-3, A-4, A-6-A-2: Approx. 6 Ohms
A-2-GROUND: Approx. 5 Ohms

A 6-B, A 7-A ABS RELAY
A-1-B-3: 60 Ohms - 100 Ohms
A-4-B-3: 60 Ohms - 100 Ohms
A-1, B-2-GROUND: Approx. 12 Volts
A-6-GROUND: Approx. 12 Volts

A 8, A 9 ABS SPEED SENSOR FRONT LH, RH
1-2: 0.8-1.3 K Ohms

A19, A20 ABS SPEED SENSOR REAR LH, RH
1-2: 1.1-1.3 K Ohms

A13-A, A14-B ABS ECU
(Connect the ECU connectors)
A-5-GROUND: Approx. 12 Volts with Ignition SW at ON position and Data Link Connector 1 (Check connector) TS-EI not connected
B-15-GROUND: Approx. 12 Volts with Ignition SW at ON position and Data Link Connector 1 (Check connector) TS-EI not connected
A-1-GROUND, A-13-GROUND: Approx. 12 Volts with Ignition SW at ON position and ABS Warning Light OFF
A-14-GROUND, A-1-GROUND: Approx. 12 Volts with Ignition SW at ON position and ABS Warning Light OFF
A-26-GROUND, A-18-GROUND: Approx. 12 Volts with Ignition SW at ON position and ABS Warning Light OFF
A-2-GROUND: Always continuous
A-15-GROUND: Always continuous
A-12-GROUND: Approx. 12 Volts with Ignition SW at ON position
B-6-GROUND: Approx. 12 Volts with brake pedal depressed
A-25-GROUND: Always approx. 12 Volts