Cylinder Head
1 Place the rocker arm assembly over the dowels on the cylinder head.
2 Install and tighten the head bolts gradually in 3 passes in the sequence shown.
3 Torque the bolts on the final pass.
Torque:58 ft.lbs. (800 kgf.cm, 78 Nm)
1 Place the rocker arm assembly over the dowels on the cylinder head.
2 Install and tighten the head bolts gradually in 3 passes in the sequence shown.
3 Torque the bolts on the final pass.
Torque:58 ft.lbs. (800 kgf.cm, 78 Nm)