Throttle Position Sensor: Specifications

Resistance

Between terminals VTA - E2
with 0 clearance at throttle stop screw 0.47 - 6.1 k ohms

Between terminals IDL - E2
with 0.50 mm (0.020 in) clearance at stop screw 2.3 k ohms or less

Between terminals IDL - E2
with 0.80 mm (0.031 in) clearance at stop screw infinity

Between terminals VTA - E2
with throttle valve fully open 3.1 - 12.1 k ohms

Between terminals VC - E2
always 3.9 - 9.0 k ohms