Drive/Propeller Shaft

SERVICE SPECIFICATIONS
Standard Length:
M/T:
LH 542.6 ± 5.0 mm (21.362 ± 0.197 inch)
RH 842.9 ± 5.0 mm (33.185 ± 0.197 inch)
A/T:
LH 548.5 ± 5.0 mm (21.594 ± 0.197 inch)
RH 844.6 ± 5.0 mm (33.252 ± 0.197 inch)

TIGHTENING SPECIFICATIONS
Center Bearing Bracket Set Bolt 64 Nm (47 ft. lbs.)
Center Bearing Lock Bolt 32 Nm (24 ft. lbs.)
Drive Shaft Lock Nut 216 Nm (159 ft. lbs.)