Connecting Rod

SERVICE SPECIFICATIONS
Thrust Clearance
STD 0.160 - 0.312 mm (0.0063 - 0.0123 inch)
Maximum 0.35 mm (0.0138 inch)

Bearing Center Wall Thickness
Reference
Mark 1 1.484 - 1.488 mm (0.0584 - 0.0586 inch)
Mark 2 1.488 - 1.492 mm (0.0586 - 0.0587 inch)
Mark 3 1.492 - 1.496 mm (0.0587 - 0.0589 inch)

Oil Clearance
STD 0.024 - 0.055 mm (0.0009 - 0.0022 inch)
U/S 0.25 0.023 - 0.069 mm (0.0009 - 0.0027 inch)
Maximum 0.08 mm (0.0031 inch)

Rod Out-Of-Alignment
Maximum Per 100 mm (3.94 inch) 0.05 mm (0.0020 inch)

Rod Twist
Maximum Per 100 mm (3.94 inch) 0.15 mm (0.0059 inch)

Bushing Inside Diameter 22.005 - 22.017 mm (0.8663 - 0.8668 inch)

Piston Pin Diameter 21.997 - 22.009 mm (0.8660 - 0.8665 inch)

Piston Pin Oil Clearance
STD 0.005 - 0.011 mm (0.0002 - 0.0004 inch)
Maximum 0.05 mm (0.0020 inch)

Bolt Outside Diameter
STD 7.860 - 8.000 mm (0.3094 - 0.3150 inch)
Minimum 7.60 mm (0.2992 inch)

TIGHTENING SPECIFICATIONS
Connecting Rod Cap To Connecting Rod
1st Pass 25 Nm (18 ft. lbs.)
2nd Pass Turn Additional 90°