M/T Torque Data

SERVICE SPECIFICATIONS
Drive In Depth:
Control Shaft Cover Oil Seal 0-1.0 mm (0-0.039 in)
Select Inner Lever Slotted Spring Pin 0 +/- 0.5 mm (0 +/- 0.020 in.)
Shift Inner Lever Slotted Spring Pin:
No.1 0 +/- 0.5 mm (0 +/- 0.020 in.)
No.2 0 +/- 0.5 mm (0 +/- 0.020 in.)

TORQUE SPECIFICATIONS
Transaxle To Engine:
Bolt A 64 Nm (47 ft. lbs.)
Bolt B 35 Nm (26 ft. lbs.)
Bolt C 29 Nm (22 ft. lbs.)
Bolt D 46 Nm (34 ft. lbs.)
Bolt E 25 Nm (18 ft. lbs.)
Bolt F 9.0 Nm (78 inch lbs.)
Stiffener Plate 37 Nm (27 ft. lbs.)
Starter To Transaxle 39 Nm (29 ft. lbs.)
Transaxle Case Protector To Transaxle 25 Nm (18 ft. lbs.)
Front Wheel 103 Nm (76 ft. lbs.)
No.2 Selecting Bellcrank With:
Selecting Bellcrank Support 20 Nm (14 ft. lbs.)
Oil Cooler:
No.1 Line To Elbow 34 Nm (25 ft. lbs.)
No.1 Line To No.2 Line 34 Nm (25 ft. lbs.)
No.2 Line To Union 34 Nm (25 ft. lbs.)
Assembly To Union 29 Nm (22 ft. lbs.)
Clamp To Oil Cooler Line Clamp 6.4 Nm (56 inch lbs.)
Line Clamp To Body 6.4 Nm (56 inch lbs.)
Line Clamp To Transaxle 17 Nm (13 ft. lbs.)
Vehicle Speed Sensor 17 Nm (13 ft. lbs.)
Back-Up Light Switch 40 Nm (30 ft. lbs.)