Vehicle Speed Sensor: Service and Repair

VEHICLE SPEED SENSOR NO.1 REPLACEMENT

To replace vehicle speed sensor no.1 the instument cluster must be removed SEE:Instrument Cluster/CarrierInstrument Cluster / Carrier


VEHICLE SPEED SENSOR NO.2 REPLACEMENT


1. Disconnect NO.2 vehicle speed sensor connector.



2. Remove NO.2 vehicle speed sensor.

(a) Remove the bolt and pull out NO.2 vehicle speed sensor.
(b) Remove the 0-ring from the NO.2 vehicle speed sensor.
(c) Install new 0-ring on the NO.2 vehicle speed sensor.

3. Install vehicle speed sensor assembly.

Torque: 5.4 Nm (55kgf.cm, 48 in lbf)

4. Connect vehicle speed sensor connector.


Note: Intsallation is the reverse order of removal.