System Specifications

TIGHTENING SPECIFICATIONS
Compressor x Cylinder Block:
Stud Bolt 47 Nm (34 ft. lbs.)
Bolt 37 Nm (27 ft. lbs.)
Nut 27 Nm (20 ft. lbs.)

Suction Tube x Compressor:
10 N.m (7 ft.lb)
Discharge Tube x Compressor:
10 N.m (7 ft.lb)

Compressor x Pressure Plate:
13.2 N.m (9 ft.lb)

Compressor x Revolution Detecting Sensor:
6.0 N.m (52 in.lb)


SERVICE DATA

Drive Belt Tension:
New Belt 165 ± 25 lb.
Used Belt 110 ± 20 lb.