M/T Torque Data

SERVICE SPECIFICATIONS
Drive In Depth:
Control Shaft Cover Oil Seal 0-1.0 mm (0-0.039 in)
Select Inner Lever Slotted Spring Pin 0 +/- 0.5 mm (0 +/- 0.020 in.)
Shift Inner Lever Slotted Spring Pin:
No.1 0 +/- 0.5 mm (0 +/- 0.020 in.)
No.2 0 +/- 0.5 mm (0 +/- 0.020 in.)

TORQUE SPECIFICATIONS
Transaxle To Engine:
Bolt A 64 Nm (47 ft. lbs.)
Bolt B 35 Nm (26 ft. lbs.)
Bolt C 29 Nm (22 ft. lbs.)
Bolt D 46 Nm (34 ft. lbs.)
Bolt E 25 Nm (18 ft. lbs.)
Bolt F 9.0 Nm (78 inch lbs.)
Stiffener Plate 37 Nm (27 ft. lbs.)
Starter To Transaxle 39 Nm (29 ft. lbs.)
Transaxle Case Protector To Transaxle 25 Nm (18 ft. lbs.)
Engine Left Mounting Insulator To Bracket 64 Nm (47 ft. lbs.)
Front Wheel 103 Nm (76 ft. lbs.)
Front Exhaust Pipe To:
Exhaust Manifold 62 Nm (46 ft. lbs.)
Center Exhaust Pipe 48 Nm (35 ft. lbs.)
Front Suspension Crossmember Assembly To:
PS Gear Assembly 113 Nm (83 ft. lbs.)
Body 206 Nm (152 ft. lbs.)
Lower Suspension Arm Bracket To Body 137 Nm (101 ft. lbs.)
Engine Mounting Insulator To Center Member:
Front 80 Nm (59 ft. lbs.)
Rear 115 Nm (85 ft. lbs.)
Engine Mounting Center Member To Body 35 Nm (26 ft. lbs.)
No.2 Selecting Bellcrank With:
Selecting Bellcrank Support 20 Nm (14 ft. lbs.)
Transmission Oil Cooler Sub Assembly To:
Elbow 34 Nm (25 ft. lbs.)
Vehicle Speed Sensor 17 Nm (13 ft. lbs.)
Back-Up Light Switch 40 Nm (30 ft. lbs.)