Manual Steering Gear
DIMENSIONSSteering Rack Runout (Max.) 0.30 mm (0.0118 inch)
GENERAL SPECIFICATIONS
Pinion Preload (Turning) 0.23-0.32 Nm (2.0-2.9 inch lbs.)
Total Preload (Turning) 0.6-1.2 Nm (5.2-10.4 inch lbs.)
TIGHTENING SPECIFICATIONS
Column Hole Cover To Body 4.9 Nm (43 inch lbs.)
Manual Steering Gear Bracket To Body 58 Nm (43 ft. lbs.)
Pinion Bearing Adjusting Screw Lock Nut:
With SST 85 Nm (63 ft. lbs.)
Less SST 113 Nm (83 ft. lbs.)
Pinion Shaft To Sliding Yoke 25 Nm (19 ft. lbs.)
Rack Guide Spring Cap Lock Nut:
With SST 41 Nm (30 ft. lbs.)
Less SST 56 Nm (42 ft. lbs.)
Rack To Rack End:
With SST 43 Nm (31 ft. lbs.)
Less SST 59 Nm (43 ft. lbs.)
Steering Main Shaft To Sliding Yoke 25 Nm (19 ft. lbs.)
Tie Rod End Lock Nut 47 Nm (35 ft. lbs.)