Crankshaft

SERVICE SPECIFICATIONS
Thrust Clearance:
Standard 0.04 - 0.24 mm (0.0016 - 0.0095 inch)
Maximum 0.30 mm (0.0118 inch)
Main Journal Oil Clearance:
Standard:
No.1 and No.4 0.014 - 0.036 mm (0.0006 - 0.0014 inch)
No.2 and No.3 0.026 - 0.048 mm (0.0010 - 0.0019 inch)
Maximum:
No.1 and No.4 0.05 mm (0.0020 inch)
No.2 and No.3 0.06 mm (0.0024 inch)
Main Journal Diameter 60.988 - 61.000 mm (2.4011 - 2.4016 inch)
Crank Pin Diameter 52.992 - 53.000 mm (2.0863 - 2.0866 inch)
Circle Runout:
Maximum 0.06 mm (0.0024 inch)
Main Journal Taper and Out-Of-Round:
Maximum 0.02 mm (0.0008 inch)
Crank Pin Taper and Out-Of-Round:
Maximum 0.02 mm (0.0008 inch)

TORQUE SPECIFICATIONS
Crankshaft To:
Crankshaft Pulley 215 Nm (159 ft. lbs.)
Drive Plate 83 Nm (61 ft. lbs.)
Flywheel 83 Nm (61 ft. lbs.)