Service Specifications
SERVICE SPECIFICATIONSCylinder Head Surface Warpage:
Maximum 0.05 mm (0.0020 inch)
Cylinder Bore Diameter:
Standard:
Mark 1 86.000 - 86.010 mm (3.3858 - 3.3862 inch)
Mark 2 86.010 - 86.020 mm (3.3862 - 3.3866 inch)
Mark 3 86.020 - 86.030 mm (3.3866 - 3.3870 inch)
Maximum:
Standard 86.23 mm (3.3949 inch)
Oversized 0.50 86.73 mm (3.4146 inch)