Crankshaft, Engine

Thrust Clearance:
Standard 0.020 - 0.220 mm (0.0008 - 0.0087 inch)
Maximum 0.30 mm (0.0118 inch)
Main Journal Oil Clearance:
No.3:
Standard 0.025 - 0.044 mm (0.0010 - 0.0017 inch)
Undersized 0.25 0.027 - 0.067 mm (0.0011 - 0.0026 inch)
Others:
Standard 0.015 - 0.034 mm (0.0006 - 0.0013 inch)
Undersized 0.25 0.019 - 0.059 mm (0.0007 - 0.0023 inch)
Main Journal Diameter:
Standard 54.988 - 55.003 mm (2.1653 - 2.1655 inch)
Undersized 0.25 54.745 - 54.755 mm (2.1553 - 2.1557 inch)
Crank Pin Diameter:
Standard 51.985 - 52.000 mm (2.0466 - 2.0472 inch)
Undersized 0.25 51.745 - 51.755 mm (2.0372 - 2.0376 inch)
Circle Runout:
Maximum 0.06 mm (0.0024 inch)
Main Journal Taper and Out-Of-Round:
Maximum 0.02 mm (0.0008 inch)
Crank Pin Taper and Out-Of-Round:
Maximum 0.02 mm (0.0008 inch)