Component Inspection

INSPECTION

1. CLEAN THROTTLE BODY
(a) Wash and clean the cast part with a soft brush and carburettor cleaner.





(b) Using compressed air, blow all passages and apertures in the throttle body.

NOTICE: To prevent deterioration, do not clean the throttle position sensor.





2. INSPECT THROTTLE VALVE
Check that there is no clearance between the throttle stop screw and throttle lever when the throttle valve is fully closed.

Ohmmeter Connection:

Reference:

3. INSPECT THROTTLE POSITION SENSOR
Using an ohmmeter, measure the resistance between each terminal.