Connecting Rod

DIMENSIONS
Thrust Clearance
Standard 0.150 - 0.330 mm (0.0059 - 0.0130 inch)
Maximum 0.380 mm (0.0150 inch)

Bearing Center Wall Thickness
Mark 1 1.484 - 1.488 mm (0.0584 - 0.0586 inch)
Mark 2 1.488 - 1.492 mm (0.0586 - 0.0587 inch)
Mark 3 1.492 - 1.496 mm (0.0587 - 0.0589 inch)

Oil Clearance
Standard 0.024 - 0.053 mm (0.0009 - 0.0021 inch)
U/S 0.25 0.023 - 0.069 mm (0.0009 - 0.0027 inch)
Maximum 0.08 mm (0.0031 inch)

Rod Bend
Maximum Per 100 mm (3.94 inch) 0.05 mm (0.0020 inch)

Rod Twist
Maximum Per 100 mm (3.94 inch) 0.15 mm (0.0059 inch)

Bushing Inside Diameter 22.005 - 22.017 mm (0.8663 - 0.8668 inch)

Piston Pin Diameter 21.997 - 22.009 mm (0.8660 - 0.8665 inch)

Bushing Oil Clearance
Standard 0.005 - 0.011 mm (0.0002 - 0.0004 inch)
Maximum 0.05 mm (0.0020 inch)

Bolt Outer Diameter
Standard 7.860 - 8.000 mm (0.3094 - 0.3150 inch)
Minimum 7.600 mm (0.2992 inch)

TIGHTENING SPECIFICATIONS
Connecting Rod Cap To Connecting Rod
1st Pass 25 Nm (18 ft. lbs.)
2nd Pass Turn Additional 90°