Removal and Installation

COMPONENTS

REMOVAL

CAUTION: Do not smoke or work near an open flame when working on
the fuel pump.

1. REMOVE FUEL TANK





2. REMOVE FUEL PUMP BRACKET ASSEMBLY FROM FUEL TANK
a. Disconnect the fuel pump connector from the clamp.
b. Remove the 8 bolts.
c. Pull out the pump bracket assembly.
d. Remove the gasket from the pump bracket.





INSTALLATION
1. INSTALL FUEL PUMP BRACKET ASSEMBLY TO FUEL TANK
a. Install a new gasket to the fuel pump.
b. Install the fuel pump assembly with the 8 bolts.

Torque: 3.5 Nm (35 kgf.cm, 30 in.lbf)

2. INSTALL FUEL TANK
3. CHECK FOR FUEL LEAKS