Mechanical Specifications

Thrust Clearance:
Standard 0.060 - 0.110 mm (0.0024 - 0.0043 inch)
Maximum 0.11 mm (0.0043 inch)
Backlash:
Crankshaft To No.1 Balance Shaft:
Off Vehicle (Standard):
At Punch Mark A 0.005 - 0.040 mm (0.002 - 0.0016 inch)
At Punch Mark B 0.005 - 0.060 mm (0.002 - 0.0024 inch)
On-Vehicle (Standard):
At Punch Mark A 0.025 - 0.065 mm (0.0010 - 0.0026 inch)
At Punch Mark B 0.025 - 0.085 mm (0.0010 - 0.0033 inch)