Sliding Roof (TMC Made)

ON-VEHICLE INSPECTION




INSPECT SLIDING ROOF GLASS ALIGNMENT
a. Start the engine and check the operation time of the sliding roof.

Operation time: Approx. 6 seconds

b. Check for abnormal noise or binding during operation.
c. With the sliding roof fully closed, check for water leakage.
d. Check for a difference in level between the sliding roof weatherstrip and roof panel.

Except rear end: 0 ± 1.5 mm (0 ± 0.059 in.)

Rear end:
0 + 1.5 mm (0 + 0.059 in.)
0 - 1.0 mm (0 - 0.039 in.)